![]() PegasusAstro Prodigy, Falcon, Indigo, DMFC, UPB, PPB and FlatMaster drivers,ĭeep Sky Dad AF1, AF2 and AF3 focuser driver,īaader Planetarium SteelDrive II focuser driver,ĪstroGadget FocusDreamPro focuser driver,ĪSTROMECHANICS ASCOM Canon EF Lens Controller focuser driver, ![]() PTP-over-USB CCD driver for Canon, Nikon, Sony Alpha and Fuji cameras, The following drivers are bundled with the application: As far as this application is based on INDIGO framework, it can use many INDIGO drivers for focusers for astronomical telescopes which can be easily adapted to control manual focus lenses or macro rails. no LiveView or manual lens drive with older Nikon and some Sony cameras), but it doesn't mean, that such camera can't be used. Not every feature is supported for every camera (e.g. The built-in INDIGO driver is based on ImageCapture API and, in theory, it can work with almost any Nikon DSLR, Canon EOS DSLR (but not EOS M or DIGIC II and older cameras) and some Sony Alpha and Fuji DSLR-like or mirrorless camera. Captured images can be plate-solved using public or local service. It can measure FWHM and the drift of a selected star to help easier and faster focus and align your equatorial telescope mount. It can preview (optionally using LiveView) or capture and save images to selected folder with any file name prefix, count and time lapse, browse captured images and show them in Finder, zoom and stretch them automatically or manually. ST4 Port: can be used connect with auto guide port of mount, for guiding.AstroDSLR is an application similar to AstroImager, an easy to use tool for astrophotography, but intended for use with DSLR cameras.ĪstroDSLR controls ISO, aperture (if lens mounted), shutter speed, exposure compensation, metering and focusing modes, white balance, image quality and format and BULB exposure length. USB 3.0 Port: can provide 5Gb bandwidth to let ASI224 run at 64fps (12bit, normal mode) or 150 fps (10bit, high speed mode) at full resolution(1.2Mega). We made this change since April 2016, which means the current unit (ASI224MC and ASI224MC-C) we produce all equiped with the newest PCB version -V1.3. We apply “amp glow reduction technology” to our ASI224MC and ASI224MC-C camera, it is a hardware modification to reduce the amp-glow of the sensor, not every sensor can benefit from this modification, but it is obvious for ASI224MC, so this upgrade is for ASI224MC and ASI224MC-C only. Most sensor will have amp-glow problem only if you do long-time exposure capture, such as longer than 1s. ![]() PCB Version1.3 (include Anti-amp glow function) Very suitable for astronomy planetary and small DSO imaging. Read Noise of ASI224 less than 1e which can compare with sCMOS or EMCCD sensors. ![]() Extremely low read noise (1.5 e) and high sensitivity especially in IR range. Very suitable for astronomy and microscopy photographĪSI224MC has a 1/3″ and 1.2M pixels sensor IMX224 with SONY Exmor and NIR Technology. Version: 1.3 (include Anti-amp glow function)Įxtremely low read noise ( 0.75e – 1.5 e) and high sensitivity especially in IR range Operating System Compatibility: Mac, Windows, LinuxĪSI224MC has a 1/3″ and 1.2M pixels sensor IMX224 with SONY Exmor and NIR Technology.Non-volatile memory/On camera storage: Build-in total 192K byte user-accessible space(image size up to 480X320).Celestron Binoculars Series Menu Toggle.
0 Comments
Leave a Reply. |